vehicle wraps Archives

Posted on July 22, 2013May 17, 2020 by James The Developer

Bonded Services Ford Transit Connect Wrap

Do you have a Ford Transit Connect or full size van that you are looking to promote your business on? Powersportswraps.com can help get your company noticed with a half or full vehicle wrap like this Transit completed for Bonded Services of Erie, PA. Notice the incorporated graphics over the side and rear glass by using perforated window film. This film prevents people from seeing what is in the van but you can see through the glass from the inside as you look out. It allows you to have your logo or lettering on the glass without obstruction.

Powersportswraps.com offers full service for all your vehicle graphic needs. From design through installation. Powersportswraps.com team will give you the look you want to get noticed as you travel around town. Vehicle wraps are moving billboards and are a very low cost way to promote your business.

Powersporstwraps.com have been serving the Erie, PA area for over 20 years. Only the best cast films from Avery, 3M, and Orafol are used for the best results and have the longest lasting graphics to withstand the harsh Erie weather.

Feel free to contact Powersportswraps.com with your lettering, sign, graphics or wrap needs, we would be happy to help. Keep in mind we also offer commercial, residential and automotive window tint. See some of our projects here on our gallery.

Posted on July 18, 2013May 17, 2020 by James The Developer

Boot Box Carolina of Meadville PA Truck Wrap

Over the past 20 years, Powersportswraps.om has been in the graphics and wrap business. Our goal has always been to earn regular, loyal customers for life; not just make a one time sale. A good example of this is Powersportswraps.com good friends at the Boot Box in Meadville PA. The owner of Boot Box, Matt, has always appreciated the extra mile taken when installing his vehicle wraps.

Take a look at this Carolina box truck wrap. It’s hard to believe that this was an old yellow Ryder rental before Powersportswraps.com applied the wrap. What makes this install more than average is that of what Powersportswraps.com does for all customers. Notice how much detail goes into certain areas like the front bumper, rear door area, under the wheel wells, and inside the door jambs. By taking the time to be sure all of these areas are blacked out this completes the whole job and improves the vehicles appearance. If these spots were left yellow, it would take away from the overall appearance of the wrap. Powersportswraps.com also added the chrome wheel caps to give the truck a fresh brand new look.

This is the second box truck wrap Powersportswraps.com has done for the (once again) happy customer, Boot Box. If you have a vehicle that needs signs or a complete wrap please contact us, we would be happy to help. See more of our vinyl wrap projects here.

Posted on September 10, 2012May 17, 2020 by James The Developer

Mossy Oak Camouflage vinyl wrapping film, 3M camo

Here are some examples of various vehicle accents and full wraps using our high quality 3M Mossy Oak wrapping film. We use only the best 3M vinyls & heavy duty cast overlaminate to provide added durability to withstand years of abuse. Using air release channels to provide a smooth, bubble-free installation. Pressure sensitive adhesives does not firmly set until firm pressure is applied making the film more forgiving during installation. Industry leading 5 year warranty against fading 3M technology are tested under the most stringent standards. We also have over 200 custom wrap patterns for you to choose from

Shop our HUGE camo store

Material Details:

Premium 3M cast vinyl materials to produce a camouflage kit with an industry leading 7 year durability rating and 5 year warranty against fading. Unlike other vinyl products, cast vinyl provides better print quality and materials free of edge lifting, peeling, cracking and pulling away. Product comes standard with a matte finish, making it ideal for adding a custom camouflage look. Material is highly conformable and contains air release technology providing a simple, clean, bubble free installation. Our camouflage materials are removable when desired and won’t leave behind an adhesive residue. We also apply a top cast sheet laminate over the image to provide added durability and protection to the image.

866-289-2358

Posted on August 28, 2012May 17, 2020 by James The Developer

Camouflage wrapping film install

Mossy Oak Camo Fender Flair Kit — Mossy Oak Camo

Wrapping certain things with camouflage film (like flair for your fender) can sometimes be tricky. Every little tip helps!

Cut Edges in Camouflage Film

Mossy Oak Fender Flair Kit — Mossy Oak Camo

This technique can be used when applying any pattern where more than one sheet has to be overlapped to continue the same pattern.

• Cut the edges prior to applying
• Try to avoid cutting directly on the application surface, as you may risk damage to the surface itself
• Apply first section of the Camouflage Film

Applying the Camouflage Film

Cutting the edges where the Camouflage Film will overlap will make the overlay seamless and invisible.
• Once the first section of the pre-edged Camouflage Film has been applied, re-wipe with alcohol before you apply the next section.
• Wiping the film with alcohol ensures a clean, non-contaminated surface
• Apply next section of the Camouflage Film

These techniques will work for any patterned film, no matter how many sections it is cut into. Need help with your next Camouflage Film install? Powersportswraps.com is here to help with all of your wrapping needs! Check out the complete line of Camouflage Wraps!

Posted on February 15, 2011May 7, 2020 by James The Developer — Leave a comment

Ford Ranger vinyl wrap for Raco contractors Erie, PA

This truck started out as a basic White Ford Ranger. Our customers from Raco Contractors Erie, PA asked that we create something custom & eye catching to help promote their business. It was nice because the did not give us any limits they just said make it cool. We started with some basic elements & effects & applied some really cool 3D effects with shadows & textures & this was the result… A one of a kind truck wrap that really grabs attention. Isn’t that what a custom vehicle wrap is supposed to do? If you have a business & you are looking to draw attention one of the best & least expensive way to do so is with a vehicle wrap. Custom vinyl wraps keep advertising each & every day no matter where you go. No time limits, no short commercial… 24 hours a day 7 days a week your is promoting your business. For pennies a day you can have a huge impact on thousands of potential customers. Contact us today to see how we can help promote your business…

Specializing in: Vinyl wrap design, Vinyl wrap application & more…

phone: 866-289-2358

Posted on February 9, 2011May 7, 2020 by James The Developer — Leave a comment

Ford Fiesta car warp, Car body wraps for all makes, Burhenn’s Pharmacy car wrap, Car wraps Erie PA

Here is a brand new Ford Festiva the we applied a half wrap & perforated window film on for a local pharmacy. Burhenn’s pharmacy is a long established local business in the Erie area. Mike Burhenn the owner wanted to draw some attention to their new delivery vehicle, something that would promote the company & the free deliver service they offer. Mike left it up to us to come up with a catchy design that was not too over the top since most of their customers were elderly. Well… that eliminated the skull theme… Kee hee :). Any way, with some discussion & bouncing some ideas off each other we came up with this layout. It flows, has nice color & didn’t cost as much as a complete car body wrap. It fit…

If you have a business that you would like to promote contact us for all your advertising needs we can provide: car wraps, truck wraps, signs, lettering, magnetic signs, perforated window film, yard signs, POP displays, & more…

phone: 866-289-2358

Posted on February 5, 2011May 7, 2020 by James The Developer — Leave a comment

Fire Blue golf car wrap, golf car wraps, golf cart wraps, true fire vinyl wrap, Shawn Dutton

Special thanks to Shawn Dutton for sending us his completed photos of his Fire Blues golf car wrap. Shawn had never used our vinyl golf cart wraps before & wasn’t sure if he could do the wrap himself. We spoke with him & provided many of the answers he needed to make an informed decision as to wraps & application. We even provided a how to apply a golf car wrap video for him to watch. Each kit we sell has vinyl wrap application instructions & a free squeegee tool provided. This fire Blue color was not a stocking color but we created it for Shawn as he made a special color request. We do our best to meet our customers needs when it comes to vinyl wrap design. Shop our HUGE vinyl wrap store